Avent SCF260/15 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Flaschenwärmer Avent SCF260/15 herunter. Avent SCF260/15 User manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
6 87
iQ Bottle and Baby Food Warmer
Food is not
warm enough
The temperature of warmed food depends on the consistency of the food.
Philips AVENT recommends that, ideally, pureed food only should be heated
with this warmer. If you nd that thicker food is not warm enough at the
end of the warming cycle, ll the warmer with an additional 30ml/1oz of
water. On step 4 and 5, choose the food from room temperature mode
and programme the warmer at the 30ml/1oz option. Before feeding your
baby, stir the food. Always check food temperature before feeding.
Display will not
illuminate / Warmer
will not turn on
Check that the lid is closed correctly. Check that the mains lead is
plugged into the mains and the power outlet is switched on. Then hold
the Power/Mode Selection Button for 3 seconds.
Symbols on the
display are ashing
• If the milk, room temperature and ml/oz symbols are ashing, then the
lid has not been closed correctly.
• If all volume symbols are ashing, and the warmer beeps intermittently
for 30 seconds then the cycle is complete. Follow Step 8 onwards to
remove the bottle or container from the warmer.
• If all mode and starting temperature symbols are ashing, then the unit
requires de-scaling. See section ‘Care of your warmer’ on page 6.
To acknowledge the de-scale warning, press and hold the Power/Mode
Selection or Volume Selection/Start Button for 3 seconds. If you do not
wish to de-scale, please be aware that this may cause irreparable damage.
The warmer
is beeping
• If ml/oz symbols ash, and the warmer beeps twice, insufcient water
has been placed in the warmer. Unplug the warmer, discard the milk or
food and empty any remaining water. Be careful as the warmer is hot.
Follow instructions from Step 1 onwards.
• If all volume symbols are ashing, and the warmer beeps intermittently
for 30 seconds then the cycle is complete. Follow Step 8 onwards to
remove the bottle or container from the warmer.
To stop the
warming cycle
Press the Power/Mode Selection Button and the warmer will beep and
return to default settings.
To start the
warming cycle
Once the correct mode, starting temperature and volume have been selected,
press and hold the Volume Selection/Start Button until the warmer beeps.
If the lid is opened
during warming cycle
If the lid is opened at any time during the warming cycle, the lights on
the display panel will ash and the warmer will stop and return to default
settings. In order to reset the warmer after the lid has been opened,
empty out any residual water, then follow instructions for use from step 1
onwards. Since this could occur at any stage of the warming cycle, milk or
food should be discarded for safety reasons.
Difculty setting the
appropriate amount of
frozen food
The maximum volume that may be selected when warming food from
frozen is 230ml/8oz.
Milk is not
warm enough
If you nd that milk is not warm enough at the end of a warming cycle, ll
the warmer with an additional 30ml/1oz of water. On step 4 and 5, choose
the milk from room temperature mode and programme the warmer at
the 30ml/1oz option. Before feeding your baby, shake the bottle or storage
container gently and check the temperature of the milk by sprinkling a
few drops on the back of your hand.
Guarantee
Philips AVENT guarantees that should the iQ Bottle and Baby Food Warmer
become faulty during twelve months from the date of purchase, it will be replaced
free of charge during this time. Please return it to the retailer where it was
purchased. Please keep your receipt as proof of purchase, together with a note
of when and where purchased. For the guarantee to be valid, please note:
The iQ Bottle and Baby Food Warmer must be used according to the instructions
in this leaet and connected to a suitable electricity supply.
The claim must not be a result of accident, misuse, dirt, neglect or fair wear
and tear.
This guarantee does not affect your statutory rights.
Philips AVENT is here to help:
www.philips.com/AVENT
Call FREE on 0800 289 064
Call FREE on 1800 509 021
1
300 364 474
AVENT, Suffolk,CO10 7QS, England
GB
IRL
AU
Philips of Holland. All logos brands and product names are
trademarks or registered trademarks of their respective
holders and are hereby recognised as such.
Care of your iQ Bottle and Baby Food Warmer
Always unplug the warmer and allow it to cool before cleaning. Wipe the inside and
outside of the warmer with a damp cloth. DO NOT USE AN ABRASIVE CLEANER.
Using cool pre-boiled or ltered water in your warmer may reduce limescale build-up.
When the warmer needs de-scaling, the mode and starting temperature symbols will
ash on the electronic display. To ensure maximum effectiveness, you should de-scale
your warmer every time it is required. To acknowledge the de-scale warning, press and
hold the Power/Mode Selection or Volume Selection/Start Button for 3 seconds. If you
do not wish to de-scale, please be aware that the unit will not remind you to de-scale
on your next use, but will instead begin re-counting cycles until the next de-scaling
is needed.
IMPORTANT! DE-SCALING
Under no circumstances should anything other than citric acid or vinegar be used as
it may cause irreparable damage. Avoid contact with eyes as this may cause irritation.
Keep out of the reach of children.
EITHER:
Mix one sachet of citric acid* (10g) with 200ml/7oz of water. Pour solution into the
empty warmer. DO NOT place a bottle, jar or cup into the warmer when de-scaling.
Close the lid of the warmer and programme the warmer to run with 310ml/11oz of
milk from frozen. After the warming cycle has ended, leave the solution to cool for
30 minutes before emptying the warmer and rinsing with tap water. Wipe the inside
and outside of the warmer with a damp cloth only.
OR:
Pour 100ml/3.5oz of vinegar mixed with 200ml/7oz of cold water into the warmer.
Allow liquid to stand in the unit until any limescale has dissolved. DO NOT place a
bottle, jar or cup into the warmer when de-scaling. DO NOT start the warming cycle.
Empty the unit and rinse thoroughly. Wipe the inside and outside of the warmer with
a damp cloth only.
*Citric acid is available from most chemists and through Philips AVENT Customer Service.
Troubleshooting Guide
42133 5435 180
Spoon
• For age range 6m+.
• Small-bowled spoons specially designed for small mouths and tender gums.
• Long handle – easy to hold, use and clean.
• Shaped for easier feeding without spills.
For your childs safety and health Warning!
Before rst use clean the product. Dishwasher safe. Sterilise using a Philips AVENT
Steam Steriliser or boil for 5 minutes. Before each use, inspect the product. Throw
away at the rst sign of damage or weakness. Do not leave in sunlight when not
i
n use or for longer than recommended in heat or sterilizing solution, as this may
weaken the product. Always use this product with adult supervision. Always check
food temperature before feeding.
WARNING!
The iQ Bottle and Baby Food Warmer is tted with a non-rewirable moulded plug. The mains supply lead of the appliance
CANNOT be replaced. If the lead is damaged, the appliance should be discarded. The supplied lead must not be used
on any other appliance and no other cord should be used with the iQ Bottle and Baby Food Warmer.
This product is manufactured to comply with the Radio Interference Requirements and the EEC Directive 89/336/EEC.
Failure to follow instructions may cause scalding or damage to product.
Always ensure water has been added before switching on the warmer.
Always ensure that you are using the correct volume of water before beginning the warming cycle. The warmer should be
emptied of residual water before each subsequent use.
• Heating food jars or tins from frozen within this warmer is NOT RECOMMENDED.
To avoid possible scalding, do not place hands over the lid ap or open the lid ap during the warming cycle.
When warming a 330ml/11oz bottle, the lid ap will lift to accommodate the larger size. This will cause a small amount of
steam to rise from the warmer.
To avoid possible scalding, take care when opening the lid after a completed cycle as there may be some residual steam.
When in use, the warmer contains hot water. Be careful to avoid spilling any water on yourself when removing
contents from the warmer.
• Use the lifter to remove small bottles, VIA Cups, and small baby food jars or tins.
Always use a cloth when removing bottles, cups, jars and tins from the warmer.
Always check feed temperature before feeding.
• For microbiological and hygienic reasons, once heated, milk and food should not be reheated again.
• Never immerse the warmer or power cord in water.
This appliance is intended for use by responsible persons, keep out of the reach of small children and the inrm.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience or knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to ensure they do not play with the appliance.
• Failure to follow de-scaling instructions may cause irreparable damage.
There are no serviceable parts inside the iQ Warmer. Do not attempt to open, service or repair the warmer yourself.
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - Troubleshooting Guide

6 87iQ Bottle and Baby Food WarmerFood is not warm enoughThe temperature of warmed food depends on the consistency of the food. Philips AVENT recomme

Seite 2 - 150ml / 5.5oz

2 43 5Thank you for choosing Philips AVENTThe Philips AVENT iQ Bottle and Baby Food Warmer is the only warmer with advanced iQ Technology, designed t

Kommentare zu diesen Handbüchern

Keine Kommentare